Skip to Content

SV-1024 LCD Controller Board

  • Panel compatibility: Compatible with 1024 x 768 resolution TFT LCD’s from manufacturers such as Toshiba, Sharp, Samsung, Philips/Ho
  • Standard input at source: h VGA analog (15 pin) standard, Automatic detection of separate sync, composite sync & sync on green. h PAL/NT
  • Input voltage: 12VDC
  • Controller dimensions: 179mm x 140mm (7.05” x 5.5”)
  • Part number: 4163500-XX
  • Availability: End of life — no longer available

Jump to Downloads

Find on the Controller Solution Generator (CSG)

END OF LIFE — no longer manufactured

This page is kept as a reference for installed systems.

SV-1024 LCD Controller Board

The SV-1024 was a Digital View LCD controller board. This page is retained so that anyone maintaining an installed system can identify the board and reach its documentation.

Specifications: SV-1024

  • Panel compatibility: Compatible with 1024 x 768 resolution TFT LCD’s from manufacturers such as Toshiba, Sharp, Samsung, Philips/Hosiden, NEC, Mitsubishi/ADI, LG, IBM, Hitachi, Fujitsu though a specified BIOS and some factory adjustment may be required for individual panel timings.
  • No. of colours: Up to 3 x 8 bit providing 16.7 million colours.
  • Vertical refresh rate: VGA, SVGA, XGA to VESA standards up to 85Hz
  • Dot clock (pixel clock) maximum: 100MHz
  • Graphics formats: Standard VGA, SVGA, XGA
  • Graphics auto mode detect: VGA, SVGA, XGA
  • Standard input at source: h VGA analog (15 pin) standard, Automatic detection of separate sync, composite sync & sync on green. h PAL/NTSC video
  • Video inputs: • Composite video: 1.0v (p-p) 75Ω, negative sync • S-Video: Y 1.0v (p-p) 75Ω, negative sync, C 0.286v (p-p) 75Ω
  • Functions display: On screen display (OSD) of functions with multiple language (7 languages)
  • Controls available: h On/Off h Brightness – inverter h OSD Menu h OSD Select up h OSD Select down h Setting + h Setting -
  • Control interface: • Buttons • Infra red • RS-232
  • Settings memory: Settings are stored in non volatile memory
  • Run time monitor: Updates at 30 minute intervals
  • PC Connectivity: VGA / SVGA / XGA analog
  • Controller dimensions: 179mm x 140mm (7.05” x 5.5”)
  • Power consumption: 10w approx. (not including panel power consumption)
  • Power load maximum: The controller has an overall 3Amp current limit.
  • Voltage output for LCD: +3.3V DC, +5V DC, +12V DC
  • Input voltage: 12VDC
  • Power protection: Fuse fitted
  • DC Power handling: An on board relay handles the power load for On/Off and power protection to the LCD.
  • o: o
  • Storage temperature limits: -40 C to +70 C
  • o: o
  • Operating temperature limits: 0 C to +60 C

Downloads: SV-1024

Other documentation for this board may be available on request — contact us.

Next Steps