Skip to Content

ST-0800 LCD Controller Board

  • Panel compatibility: 640 x 480 and 800 x 600 DSTN LCD’s from manufacturers such as Sharp, Hitachi, Kyocera Citizen Sanyo, etc thoug
  • Standard input at source: VGA analog (15-pin) standard with automatic detect separate sync, composite sync or sync on green
  • Input voltage: 12VDC
  • Controller dimensions: 178mm x 91.5mm x 21mm
  • Part number: 4164202-30
  • Availability: End of life — no longer available

Jump to Downloads

Find on the Controller Solution Generator (CSG)

END OF LIFE — no longer manufactured

This page is kept as a reference for installed systems.

ST-0800 LCD Controller Board

The ST-0800 was a Digital View LCD controller board. This page is retained so that anyone maintaining an installed system can identify the board and reach its documentation.

Specifications: ST-0800

  • Panel compatibility: 640 x 480 and 800 x 600 DSTN LCD’s from manufacturers such as Sharp, Hitachi, Kyocera Citizen Sanyo, etc though some factory adjustment may be required for individual panel timings.
  • No. of colours: Up to 64 gray level per colour, e.g. 262144 colours.
  • Vertical refresh rate: VGA, SVGA to VESA standards up to 75Hz
  • Graphics formats: Standard VGA & SVGA
  • Standard input at source: VGA analog (15-pin) standard with automatic detect separate sync, composite sync or sync on green
  • Controls available: - On/Off - Brightness (inverter) - OSD menu - OSD select up - OSD select down - OSD setting + - OSD setting -
  • Control interface: - Buttons - Infra red - RS-232
  • Settings memory: Settings are stored in non volatile memory
  • Run time monitor: Updates at 30minutes intervals
  • Multi-language OSD support: 7 languages
  • VESA DPMS implementation: Yes
  • Plug & Play: VESA DDC 1, 2/b compatible
  • Voltage output for LCD: +3.3V DC, +5V DC
  • Input voltage: 12VDC
  • Power protection: Fuse fitted - auto reset
  • DC Power handling: An on board relay handles the power load for On/Off and power protection to the LCD.
  • Power load maximum: The controller has an overall 3Amp current limit.
  • Controller power consumption: Approx 2.5W (controller logic only, no panel)
  • Controller dimensions: 178mm x 91.5mm x 21mm
  • Storage temperature limits: -40oC to +70oC
  • Operating temperature limits: 0oC to +65oC

Downloads: ST-0800

Other documentation for this board may be available on request — contact us.

Next Steps