Skip to Content

SP-1600 LCD Controller Board

  • Panel compatibility: Compatible with 1600x1200, 1366x768, 1280x1024, 1280x768, 1024x768, 800x600 & 640x480 resolutions of TFT LCD p
  • Panel signal: TTL(Single pixel) / LVDS
  • Panel power: DC 3.3V, 5V, 12V
  • Standard input at source: VGA analog (15 pin) standard with automatic detection of: Digital Separate Sync; Composite Sync Sync On Green.
  • Input voltage: 12VDC +/- 5%
  • Controller dimensions: 179mm x 120.4mm (7.” x 4.74”)
  • Part number: 41699002X-3
  • Availability: End of life — no longer available

Jump to Downloads

Find on the Controller Solution Generator (CSG)

END OF LIFE — no longer manufactured

This page is kept as a reference for installed systems.

SP-1600 LCD Controller Board

The SP-1600 was a Digital View LCD controller board. This page is retained so that anyone maintaining an installed system can identify the board and reach its documentation.

Specifications: SP-1600

  • Panel compatibility: Compatible with 1600x1200, 1366x768, 1280x1024, 1280x768, 1024x768, 800x600 & 640x480 resolutions of TFT LCD panels from manufacturers A specified BIOS and some factory adjustment may be required for individual panel timings.
  • No. of colours: Up to 3 x 8 bit providing 16.7 million colours.
  • Panel power: DC 3.3V, 5V, 12V
  • Panel signal: TTL(Single pixel) / LVDS
  • Vertical refresh rate: 60Hz at UXGA & SXGA and up to 75Hz for other lower resolutions
  • Graphics formats: Standard VESA VGA, SVGA, XGA, SXGA, WXGA, UXGA. Other special formats through specified BIOS and factory adjustment.
  • Graphics auto mode detect: VGA, SVGA, XGA, SXGA, WXGA & UXGA interlaced and non-interlaced
  • Standard input at source (analog RGB): VGA analog (15 pin) standard with automatic detection of: Digital Separate Sync; Composite Sync Sync On Green.
  • Video formats: PAL, NTSC & SECAM
  • Video inputs: ARGB 1 ARGB 2 DVI-I Composite video S-Video SD Component video (YCbCr)
  • Functions display: On screen display (OSD) of functions
  • OSD menu functions: Image controls: Brightness, Contrast, Saturation, Hue, Sharpness, Aspect size, Color temperature, Video Scaling, OSD position, OSD timeout, Source select, Hot keys, etc.
  • OSD menu controls available: Power On/Off Backlight brightness OSD Menu OSD Select up OSD Select down Setting + Setting -
  • Control interface: Buttons
  • Settings memory: Settings are stored in non volatile memory
  • PC Connectivity: VGA / SVGA / XGA / SXGA / UXGA analog or digital
  • Controller dimensions: 179mm x 120.4mm (7.” x 4.74”)
  • Power consumption: 10w approx. (not including panel power consumption)
  • Power load maximum: The controller has an overall 3Amp current limit.
  • Input voltage: 12VDC +/- 5%
  • Power protection: Fuse fitted (Resettable)
  • o: o
  • Storage temperature limits: -40 C to +70 C
  • o: o
  • Operating temperature limits: 0 C to +60 C

Downloads: SP-1600

Other documentation for this board may be available on request — contact us.

Next Steps