Skip to Content

PDP-1280 LCD Controller Board

  • Panel compatibility: Supported with 852x480 resolutions of Plasma panels - Fujitsu 42” Plasma (FPF42C1066UE-01 and FPF42C128128UA-0
  • Panel signal: TTL with LVDS & TMDS options (through add-on board)
  • Standard input at source: VGA analog (15 pin) standard with automatic detection of:
  • Input voltage: 12VDC
  • Controller dimensions: 179mm x 120.4mm (7.” x 4.74”)
  • Part number: 4165102-52
  • Availability: End of life — no longer available

Jump to Downloads

Find on the Controller Solution Generator (CSG)

END OF LIFE — no longer manufactured

This page is kept as a reference for installed systems.

PDP-1280 LCD Controller Board

The PDP-1280 was a Digital View LCD controller board. This page is retained so that anyone maintaining an installed system can identify the board and reach its documentation.

Specifications: PDP-1280

  • Panel compatibility: Supported with 852x480 resolutions of Plasma panels - Fujitsu 42” Plasma (FPF42C1066UE-01 and FPF42C128128UA-01), NEC 42” Plasma (NP4203MF02 and NP42B1ME01), NEC 50” Plasma (NP50C1MF01), 1024x1024, 1280x768, 1365x768 resolutions to be supported. A specified BIOS and some factory adjustment may be re
  • No. of colours: Up to 3 x 8 bit providing 16.7 million colours.
  • Signal level: 3.3V
  • Panel signal: TTL with LVDS & TMDS options (through add-on board)
  • Vertical refresh rate: Up to 85Hz at VGA, SVGA, XGA
  • Dot clock (pixel clock) maximum: 135MHz
  • Graphics formats: Standard VESA VGA, SVGA, XGA, 852x480(wide screen driver) Other special formats through specified BIOS and factory adjustment.
  • Graphics auto mode detect: VGA, SVGA, XGA interlaced and non-interlaced
  • Standard input at source (analog: VGA analog (15 pin) standard with automatic detection of:
  • RGB): Digital Separate Sync; Composite Sync & Sync On Green.
  • Video formats: PAL, NTSC & SECAM
  • Video inputs: Composite video S-Video Component video (YCbCr)
  • Functions display: On screen display (OSD) of functions
  • OSD menu functions: Image controls: Panel brightness/contrast, Color Temperature, Video Adjustment, Video System, Position, PIP, Rotation, Gamma, Video Scaling, Language, Video source, Utilities, Volume
  • OSD menu controls available: Power On/Off Backlight brightness OSD Menu OSD Select up OSD Select down Setting + Setting -
  • Control interface: Buttons Infra red RS-232 serial control
  • Settings memory: Settings are stored in non volatile memory
  • PC Connectivity: VGA / SVGA / XGA analog
  • Controller dimensions: 179mm x 120.4mm (7.” x 4.74”)
  • Power consumption: 10w approx. (not including panel power consumption)
  • Power load maximum: The controller has an overall 3Amp current limit.
  • Input voltage: 12VDC
  • Power protection: Fuse fitted
  • DC Power handling: An on board relay handles the power load for On/Off and power protection to the panel
  • o: o
  • Storage temperature limits: -40 C to +70 C

Downloads: PDP-1280

Other documentation for this board may be available on request — contact us.

Next Steps