Skip to Content

ACM-1024 LCD Controller Board

  • Panel compatibility: 1024 x 768 TFT LCD’s from manufacturers such as Sharp, NEC, Toshiba, IBM, Hitachi, Philips/Hosiden, Fujitsu, M
  • Standard input at source: VGA analog (15-pin) standard, separate sync only
  • Input voltage: 12VDC
  • Controller dimensions: 178mm x 91.5mm x 21mm
  • Part number: 4164600-3X
  • Availability: End of life — no longer available

Jump to Downloads

Find on the Controller Solution Generator (CSG)

END OF LIFE — no longer manufactured

This page is kept as a reference for installed systems.

ACM-1024 LCD Controller Board

The ACM-1024 was a Digital View LCD controller board. This page is retained so that anyone maintaining an installed system can identify the board and reach its documentation.

Specifications: ACM-1024

  • Panel compatibility: 1024 x 768 TFT LCD’s from manufacturers such as Sharp, NEC, Toshiba, IBM, Hitachi, Philips/Hosiden, Fujitsu, Mitsubishi, Samsung, LG, Hyundai, etc though some factory adjustment may be required for individual panel timings.
  • No. of colours: Up to 3 x 8 bit providing 16.7 million colours.
  • Vertical refresh rate: VGA, SVGA, XGA to VESA standards up to 85Hz
  • Dot clock (pixel clock) maximum: 95MHz
  • Graphics formats: Standard VGA, SVGA & XGA
  • Graphics mode auto detect: Yes, VGA, SVGA & XGA
  • Standard input at source: VGA analog (15-pin) standard, separate sync only
  • Controls available: - On/Off - Brightness (inverter) - OSD menu, - OSD select up - OSD select down - OSD setting + - OSD setting -
  • Control interface: - Buttons - RS-232
  • Settings memory: Settings are stored in non volatile memory
  • Multi-language OSD support: 5 languages (English, French German, Spanish and Chinese)
  • VESA DPMS implementation: Yes
  • Plug & Play: VESA DDC 1, 2/b compatible
  • Voltage output for LCD: +3.3V DC, +5V DC
  • Input voltage: 12VDC
  • Power protection: Fuse fitted - auto reset
  • DC Power handling: An on board relay handles the power load for On/Off and power protection to the LCD.
  • Power load maximum: The controller has an overall 3Amp current limit.
  • Controller power consumption: Approx 2.5W (controller logic only, no panel)
  • Controller dimensions: 178mm x 91.5mm x 21mm
  • Storage temperature limits: -40oC to +70oC
  • Operating temperature limits: 0oC to +65oC

Downloads: ACM-1024

Other documentation for this board may be available on request — contact us.

Next Steps