SDM-1920-LVDS LCD Controller

SDM-1920-LVDS controller

Intel® SDM-S LCD Controller

Connect your LCD panel:
•  LCD support: Up to 1920x1200, 10 bit
•  Panel connectivity: LVDS
•  Connector / Input:
   - 1 x Intel® SDM-S
   - 1 x HDMI 1.4
•  RS-232 control
•  Internal USB & touch panel support
•  Customization: Contact us

•  Part number: 4176800xx-3

For 4K & SDM Large support see:


SDM-1920-LVDS LCD Controller for Intel SDM Small

The SDM-1920-LVDS LCD controller is an interface board for easy interface to compatible LCD panels such as from AUO, BOE, Innolux, LG Display, Samsung, Sharp and others. The SDM-1920-LVDS is supported by a wide selection of panel connection cables and other accessories together with system development documentation, 3D drawings and engineering support for customization.

The SDM-1920-LVDS is part of Digital View's SDM controller family, the other current model is the SVX-4096-SDM. The feature set of the SDM-1920-LVDS ensures suitability for many commercial display applications such as digital signage and corporate AV. A full summary of Digital View LCD controllers can be seen here LCD Controller Summary.

Specifications: SDM-1920-LVDS

Panel Connectivity Panel resolutions: 1920x1200, 1920x1080
Panel connection: LVDS (Single/Dual channel)
Colors: Up to 10 bit per color (ie 1.06 billion colors)
Panel Power: Support for 3.3V, 5V, 10V, 12V, 18V (note, separate power input for high power LCD panels)
Backlight brightness control: DPMS enable pin (3.3v or 5v), Analog or PWM brightness control via serial port controller
Connection Diagrams: For Connection Diagrams showing setup details for connecting specific LCD panels see the Digital View Controller Solution Generator, click here.
Customization: Contact us for details of customization options.
Connector: Intel® SDM-S (Small) for up to 1920x1200 resolution
Input: HDMI 1.4
60Hz up to 1920x1200
75Hz up to 1600x1200
480p, 576p, 720p, 1080i, 1080p
Function Interface On Screen Display (OSD) Menu
Function Controls External Buttons, Infra-red (IR) remote,
Serial Port (RS-232): For connection and commands see manual.
see manual for more details
Basic: Backlight brightness, Contrast, Color Temperature, Image positioning, Saturation, Hue, Sharpness, Black level
Additional: Input source select, Auto source seek, Auto picture setup, Auto color gain, Manual clock & phase, OSD timeout, OSD menu transparency, Image orientation, System Information, Image scaling -Up/Down scaling to fit input to panel resolution & aspect ratio, Gamma, Aspect/Size, Menu language (English, French, Spanish), OSD timeout, Programming Hotekey 1&2, Auto power, Video standard, Volume. Load factory defaults.
Special: USB media failover
Audio Digital audio line out (from header) with OSD volume control, not amplified
Other Status indicators on board: Dual color or LED
Plug & Play: DDC 1.2/b compatible
EDID: Auto-set to panel resolution to match settings
Power in: 12/24V DC
Size: 180 x 160mm
Reliability MTBF in excess of 100,000 hours @ 25°C (calculated using Telcordia SR-332 procedure)
Warranty 3 years
Firmware upgrade method From USB drive connected to USB port on the controller


•  Brochure - TBA
•  Manual (PDF)

•  2D Drawing (PDF)
•  2D Drawing (DWG)
•  3D Drawing (SLDPRT) - pending

LCD Panel Connection Diagrams
•  Controller Solution Generator

Support: Call...

•  USA: +1.408.782.7773
•  UK: +44-(0)20-7631 2150
•  HK: +852-2861 3615

Email: Please use the form below to
direct your enquiry to the nearest office.


For a full selection of LCD Controller accessories click here.

OSD Buttons

accessory - osd buttons


accessory - 3G-SDI


accessory - osd buttons

Audio Board

accessory - audio amp

IR Remote

accessory - IR remote

120Hz Panels

accessory - IE-2000