Touch Screen Accessories (for M3-100 & M3-200)
A full range of touch screen, membrane and mechanical buttons are offered for both the M3-100 and M3-200. Via the DV Studio utility program, touch events can be recognized and the files played according to the playlist instructions. Solutions offered include segmented 8 button touch screens, custom programmed analog touch screens and various membrane and button configurations. 4 Button Custom Membrane 8 Button Mechanical Switch 24 Button Serial Output 24 Button Custom Membrane Documentation

PowerSupply (for M3-100 & M3-200)
Switching powers supply. Agency certified for UL CSA CE. 12V 2.0A power supply (100~240VAC) (needs IEC 405 style AC power cord ordered separately) Documentation

Audio (for M3-100 & M3-200)
Dual speaker kit to use the built-in 2 watt per channel stereo amplifier. Dual Oval speakers with 4 pin connector & 300mm leads needs IEC 405 style AC power cord ordered separately) Volume control consisting of a 4.7 K ohm potentiometer on a 300mm lead that plugs into VR1 to provide manual adjustment of speaker volume. Note: Volume may also be controlled via content or button functions. Documentation

 

Infra Red Remote Control Kit (for M3-100 & M3-200)
Infra red sensor and proprietary infrared controller allow control of all player functions remotely. Documentation

Programmable Analog Touch Controller (for M3-200)
The Analog Touch Controller enables standard resistive touch screens to be used with the M3-200 serial port. The controller is provided programmed for the number of buttons and the physical button layout as defined by the customer. Up to 16 touch points can be defined as event triggers or more if using the bar code input feature. Documentation

CCD Barcode Reader (for M3-200)
The CCD Bar Code Reader interfaces to the serial port and can read all industry standard bar code formats. Using the DV Studio utility, each bar code can trigger a specific track to play in the playlist. Documentation

Light Sensors (for M3-200) The light sensor accessories are available in 1 and 4 sensor models as standard (other configurations available as custom). Exposing any of the sensor to light creates an event trigger and the appropriate function in the playlist to be triggered. Documentation

Motion Detector The PIR Motion sensor monitors a field and recognizes the presence of warm bodies. The sensor will then trigger an event as defined in the playlist. Documentation

Intelligent Motion Detector The Intelligent Motion Detector can be custom programmed to vary the delay and actions of the motion trigger. It supports relay functions that can be used to on and off devices or audio streams etc. Documentation

Adobe Acrobat is required to view .pdf documents